SCUDERI Engine Reaches 65 MPG in Lab Tests

WEST SPRINGFIELD, MA--Sept. 13, 2011: Scuderi Group today released findings from a computer simulation study measuring the performance of the Scuderi Engine modeled against the European class of "high economy" vehicles. The data showed that a turbocharged/air-hybridized Scuderi Engine can achieve at least 65 miles per U.S. gallon (77 UK mpg or 3.7 liters per 100 km) while emitting significantly less CO2.

The average fuel economy for a gasoline vehicle in the European high economy class is about 52 U.S. mpg or 4.5 l/100km. Commissioned by Scuderi Group, the simulations were conducted by Southwest Research Institute (SwRI), an internationally recognized, independent research laboratory based in San Antonio, Tex. In the study, SwRI also found the Scuderi Engine emitted only 85 g/km of CO2, compared to 104 g/km, which is the average amount emitted from a conventional engine in this particular vehicle class.

In the SwRI study, a survey of European high economy gasoline city cars was carried out from which the specifications of a representative "average" vehicle (mass, drag coefficient, power, top speed, acceleration, drivability) were derived. A Scuderi Engine was next sized together with appropriate gear and final drive ratios to match the required target vehicle performance (top speed, acceleration, drivability) whilst minimizing the fuel consumption over the European drive cycle (NEDC).

"The ability to demonstrate consistent power and improved efficiencies with credible analysis of our engine is essential for the OEMs evaluating the Scuderi Engine," said Sal Scuderi, president of Scuderi Group. "These new results continue to build on the progress we've made in the development and testing stages and are critical as we continue to move closer to commercialization. We are very confident that these efficiency numbers will only get better with every new discovery around this exciting new combustion process."

The Scuderi Engine is a split-cycle engine based on new combustion science that has the manufacturability of a conventional engine combined with unparalleled engine efficiency gains. Consistent with conventional four-stroke engine designs, the combustion cycle of the Scuderi Engine has two high-pressure strokes--compression and power. The Scuderi Engine achieves its lowest rate of fuel consumption when utilizing a turbocharger in Miller Cycle configuration, which can be readily achieved by differential sizing of compressor and expander cylinders. The design is also optimized for air hybridization (when a small air tank is applied to capture and reuse wasted energy).

Governments worldwide view the electric car technology as a partial answer to climate change, pollution, dependence on oil and the need to achieve higher fuel economy. Many experts anticipate that the adoption of non-fossil fuel technologies will take several decades to occur due to limitations of the technology and the exorbitant infrastructure and development costs required. Scuderi has created a high efficiency engine design based on new science that involves little re-tooling and minimal manufacturing costs, meaning no major upgrades are required for the worldwide transportation infrastructure. The Scuderi Engine will bridge the gap between fossil fuels and renewables for decades to come as it provides efficiency gains that have more impact and less cost than alternative transportation technologies today.

To hear an audio podcast with President Sal Scuderi discussing the news please visit the following link: Scuderi Engine.

About the SCUDERI Engine

The SCUDERI Engine divides the four strokes of a combustion cycle between two cylinders - one cylinder functions as an air compressor, handling intake and compression, while the other cylinder handles combustion and exhaust. By optimizing the split-cycle concept, the engine can drastically reduce NOx and CO2 emissions and substantially improve fuel efficiency, compared to a conventional engine. The engine requires one crankshaft revolution to complete a single combustion cycle and is projected to have higher torque, thermodynamic efficiency, and lower emissions than possible with today's engines.

About Scuderi Group

Based in West Springfield, Mass., with offices in Frankfurt, Germany, and Nagoya, Japan, Scuderi Group has developed a revolutionary engine technology anticipated to replace many of the standard internal combustion engines used in applications such as cars, trucks, power generators, ships, agriculture equipment, etc. Securing $85M in funding to date, Scuderi Group's business model is to license its technology to qualified engine manufacturers worldwide. The company's global patent portfolio contains more than 476 patent applications filed and 154 issued in 50 countries.

Scuderi and the corporate logo (also known as the SG Design Mark), are trademarks of Scuderi Group, LLC in the United States. All other trademarks are the property of their respective owners.